- [ ] hold locknut over last bolt with pliers and tighten
it from below with allen wrench
* attach caster to deck
- - [ ] locate materials
- - [ ] 3x 6-32x5/8 inch bolt
- - [ ] 3x 6-32 lock nut
- - [ ] 3x #6 washer
- - [ ] caster holder
- - [ ] caster ball
- - [ ] locate tools
- - [ ] magnetic tray
- - [ ] socket wrench
- - [ ] 5/16 inch socket
- - [ ] 5/64 inch hex wrench
- - [ ] attach first bolt
- - [ ] put #6 washer on 6-32 bolt
- - [ ] put bolt through hole 4,1 on deck grid from top
- - [ ] bring middle hole of caster holder towards that bolt
- - [ ] finger tighten a locking nut onto the bolt
- it will be tightened more after getting all the bolts through the
- caster holder
- - [ ] put a washer on another bolt, put that bolt through hole
- 4,2 on deck and finger tighten nut to it
- - [ ] do the same through hole 5,1
- - [ ] use socket, socket wrench and hex wrench to tighten all 3 bolts
+ - [ ] watch "03 caster intro"
+ - [ ] finger tighten first bolt
+ - [ ] locate materials, from bag "3. caster"
+ - [ ] 1x 6-32x5/8 inch bolt
+ - [ ] 1x 6-32 lock nut
+ - [ ] 1x #6 washer
+ - [ ] locate tools
+ - [ ] fingers
+ - [ ] watch "03 first bolt finger tighten"
+ - [ ] put washer on bolt
+ - [ ] put bolt through deck in one of 4 holes at center back of deck
+ - [ ] put caster holder onto bolt
+ - [ ] finger tighten locknut onto bolt
+ - [ ] finger tighten remaining bolts
+ - [ ] locate materials
+ - [ ] 2x 6-32x5/8 inch bolt
+ - [ ] 2x 6-32 lock nut
+ - [ ] 2x #6 washer
+ - [ ] locate tools
+ - [ ] fingers
+ - [ ] watch "03 finger tighten all bolts"
+ - [ ] for each bolt, do the following
+ - [ ] put washer on bolt
+ - [ ] put bolt through deck in one of 4 holes at center back of deck
+ - [ ] put caster holder onto bolt
+ - [ ] finger tighten locknut onto bolt
+ - [ ] finish tightening with tools
+ - [ ] locate tools
+ - [ ] 5/16 socket
+ - [ ] socket wrench
+ - [ ] 5/64 allen wrench
+ - [ ] watch "03 socket tighten first bolt" and
+ "03 socket tightened complete"
+ - [ ] tighten the locknuts onto the bolts to hold the caster in place
* attach wires to motor
- [ ] locate materials
- [ ] 2x motor