Added MakerBus reset circuit.

[challenge-bot] / pcb / index.html

diff --git a/pcb/index.html b/pcb/index.html
index 7cba89b1f8bbff22a6a582033e6d60dabeb21a9b..3a7a5692a4ede71b9c6e67ebaddc7bce478b20db 100644 (file)
--- a/pcb/index.html
+++ b/pcb/index.html
@@ -37,15 +37,15 @@ Table of Contents
                                                                </H2>
                                                                <P>
 The schematic is available as either a
-    <A HRef="busduino.pdf">
+    <A HRef="mbino.pdf">
 .pdf</A> file or as a
-    <A HRef="busduino.svg">
+    <A HRef="mbino.svg">
 .svg</A> (Scalable Vector Graphics) file.
 The .pdf file should print reasonably well on a black
 and white printer.  The .svg file is embedded below:
                                                                </P>
 
-    <Img Src="busduino.svg">
+    <Img Src="mbino.svg">
                                                                <P>
 There are two 2.1mm power jacks , N1 and N3.
 N1 feeds power through protection diode D1 and
@@ -105,17 +105,10 @@ connected to D13 (SCK) and D12 (MISO) pins on U4.
 2.0 Design Files</A>
                                                                </H2>
                                                                <P>
-This board was designed using KiCAD.  A complete KiCAD
-archive of board is found in
-    <A HRef="busduino.zip">
-busduino.zip</A>.  ("BusDuino" was the original name
-of the board before it was renamed to "MBino".)
-When this file is unzipped, the KiCad project file
-can be found down in
-<Code>robus/busdino/rev_b/busdino.pro</Code>.  Various
-shared <Code>.mod</Code> and <Code>.lib</Code> files
-are kept in the <Code>robus</Code> directory.  All
-Gerber and drill files are generated using KiCad.
+This board was designed using KiCAD.  The design
+files are kept at
+    <A HRef="http://github.com/waynegramlich/mbino">
+http://github.com/waynegramlich/mbino</A>.
                                                                </P>
                                                                <H2>
     <A Name="Errata_and_Notes">
@@ -124,9 +117,7 @@ Gerber and drill files are generated using KiCad.
                                                                <P>
 The following errors and issues are noted:
                                                                <UL><LI>
-    U1 Vin/Vout pins are swapped
-                                                               </LI><LI>
-    A reset circuit from MakerBus is needed.
+    A reset circuit for MakerBus is needed.
                                                                </LI></UL>
                                                                </P><P>
 The design notes for the reset circuit are: