c9cf8f80 |
1 | /* GNU AGPLv3 (or later at your option) |
2 | see bottom for more license info */ |
3 | |
4 | /* riser foot for raising bathroom shelves */ |
5 | |
6 | fudge = 1; |
1b6eae45 |
7 | // how much higher the shelf needs to be |
8 | extra_height = 150; |
9 | // radius of foot of shelf actually measured with calipers |
10 | foot_radius_measured = 42 / 2; |
11 | foot_radius = foot_radius_measured + fudge; |
c9cf8f80 |
12 | wall_thickness = 3; |
13 | |
1b6eae45 |
14 | module ring_2d(inner_radius, outer_radius) { |
c9cf8f80 |
15 | difference() { |
16 | circle(outer_radius); |
17 | circle(inner_radius); } } |
18 | |
1b6eae45 |
19 | module foot_riser(foot_radius, extra_height) { |
20 | outer_radius = foot_radius + wall_thickness; |
c9cf8f80 |
21 | linear_extrude(height = 200) { |
1b6eae45 |
22 | ring_2d(foot_radius, outer_radius); } } |
c9cf8f80 |
23 | |
24 | /* |
25 | This file is part of 3d-printables. |
26 | |
27 | 3d-printables is free software: you can redistribute it and/or modify |
28 | it under the terms of the GNU Affero General Public License as published by |
29 | the Free Software Foundation, either version 3 of the License, or |
30 | (at your option) any later version. |
31 | |
32 | 3d-printables is distributed in the hope that it will be useful, |
33 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
34 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
35 | GNU Affero General Public License for more details. |
36 | |
37 | You should have received a copy of the GNU Affero General Public License |
38 | along with challenge-bot. If not, see <http://www.gnu.org/licenses/>. |
39 | */ |