1 /* GNU AGPLv3 (or later at your option)
2 see bottom for more license info */
4 /* riser foot for raising bathroom shelves */
7 // how much higher the shelf needs to be
9 // radius of foot of shelf actually measured with calipers
10 foot_radius_measured
= 42 / 2;
11 foot_radius
= foot_radius_measured
+ fudge
;
14 module
ring_2d(inner_radius
, outer_radius
) {
17 circle(inner_radius
); } }
19 module
foot_riser(foot_radius
, extra_height
) {
20 outer_radius
= foot_radius
+ wall_thickness
;
21 linear_extrude(height
= 200) {
22 ring_2d(foot_radius
, outer_radius
); } }
25 This file is part of 3d-printables.
27 3d-printables is free software: you can redistribute it and/or modify
28 it under the terms of the GNU Affero General Public License as published by
29 the Free Software Foundation, either version 3 of the License, or
30 (at your option) any later version.
32 3d-printables is distributed in the hope that it will be useful,
33 but WITHOUT ANY WARRANTY; without even the implied warranty of
34 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
35 GNU Affero General Public License for more details.
37 You should have received a copy of the GNU Affero General Public License
38 along with challenge-bot. If not, see <http://www.gnu.org/licenses/>.