challenge-bot.com Git - ozzloy@gmail.com/3d-printables/blob - crazyflie-2.0-housing.scad

   1 /* GNU AGPLv3 (or later at your option)
   2    see bottom for more license info */
   3
   4 /* protective housing for crazyflie 2.0.
   5
   6    reinforce the arms so they do not snap.
   7
   8    keep the props up high so they do not get hairs from the ground
   9    wrapped around the motor shaft.
  10  */
  11
  12 main_body_width_measured = 28.0;
  13 main_body_length_measured = 31.0;
  14 main_body_height_measured = 1.5;
  15
  16
  17 arm_width_measured = 3.6;
  18 arm_length_measured = 79.0;
  19 arm_height_measured = main_body_height_measured;
  20
  21 cube([main_body_width_measured,
  22       main_body_length_measured,
  23       main_body_height_measured],
  24      center = true);
  25 rotate(45){
  26      cube([arm_width_measured,
  27            arm_length_measured,
  28            arm_height_measured],
  29           center = true);}
  30 rotate(-45){
  31      cube([arm_width_measured,
  32            arm_length_measured,
  33            arm_height_measured],
  34           center = true);}
  35
  36 /*
  37   This file is part of 3d-printables.
  38
  39   3d-printables is free software: you can redistribute it and/or modify
  40   it under the terms of the GNU Affero General Public License as published by
  41   the Free Software Foundation, either version 3 of the License, or
  42   (at your option) any later version.
  43
  44   3d-printables is distributed in the hope that it will be useful,
  45   but WITHOUT ANY WARRANTY; without even the implied warranty of
  46   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  47   GNU Affero General Public License for more details.
  48
  49   You should have received a copy of the GNU Affero General Public License
  50   along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
  51 */