/* add one to have some thickness all around weight holes
for first layer */
- new_start = old_end / 8 + 1;
+ new_start = old_end / 16 + 1;
new_end = old_end;
old_range = old_end - old_start;
cylinder(h = actual_height + 0.1,
r = bearing_radius - bearing_lip_overhang,
center = true);
- cylinder(h = bearing_thickness + 0.1,
- r = bearing_radius + 0.1,
+ cylinder(h = bearing_thickness + 0.05,
+ r = bearing_radius + 0.15,
center = true);
for(arm = [0 : arms - 1]) {
rotate(arm * (360 / arms)) {
cylinder(h = actual_height + 0.1,
r = weight_radius - weight_lip_overhang,
center = true);
- cylinder(h = weight_thickness + 0.1,
- r = weight_radius + 0.1,
+ cylinder(h = weight_thickness + 0.05,
+ r = weight_radius + 0.15,
center = true); } } } } }
/*