create makefile to generate gcode

diff --git a/foot-riser-makerfarm-1.75mm.ini b/foot-riser-makerfarm-1.75mm.ini
new file mode 100644 (file)
index 0000000..6f9318e
--- /dev/null
+++ b/foot-riser-makerfarm-1.75mm.ini
@@ -0,0 +1,131 @@
+# generated by Slic3r 1.2.10-dev on Mon Apr 11 16:27:35 2016
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 70
+before_layer_gcode = 
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 20%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_bed_temperature = 90
+first_layer_extrusion_width = 200%
+first_layer_height = 0.35
+first_layer_speed = 30%
+first_layer_temperature = 255
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 1
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.35
+max_fan_speed = 100
+max_print_speed = 80
+max_volumetric_speed = 0
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 15
+notes = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-makerfarm-1.75mm.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+pressure_advance = 0
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 220
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 130
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0

diff --git a/foot-riser-makerfarm-3mm.ini b/foot-riser-makerfarm-3mm.ini
new file mode 100644 (file)
index 0000000..261ab10
--- /dev/null
+++ b/foot-riser-makerfarm-3mm.ini
@@ -0,0 +1,131 @@
+# generated by Slic3r 1.2.10-dev on Mon Apr 11 16:27:03 2016
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 70
+before_layer_gcode = 
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 3
+fill_angle = 45
+fill_density = 20%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_bed_temperature = 90
+first_layer_extrusion_width = 200%
+first_layer_height = 0.35
+first_layer_speed = 30%
+first_layer_temperature = 255
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 1
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.35
+max_fan_speed = 100
+max_print_speed = 80
+max_volumetric_speed = 0
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 15
+notes = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-makerfarm-3mm.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+pressure_advance = 0
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 220
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 130
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0

diff --git a/makefile b/makefile
new file mode 100644 (file)
index 0000000..3cdff94
--- /dev/null
+++ b/makefile
@@ -0,0 +1,26 @@
+%.amf:%.scad %-data.scad makefile
+       openscad-nightly $< -o $@
+
+%-makerfarm-3mm.gcode: %.amf %-makerfarm-3mm.ini makefile
+       slic3r \
+       --load $(patsubst %.gcode,%.ini,$@) \
+       --output $@ \
+       $<
+
+%-makerfarm-1.75mm.gcode: %.amf %-makerfarm-1.75mm.ini makefile
+       slic3r \
+       --load $(patsubst %.gcode,%.ini,$@) \
+       --output $@ \
+       $<
+
+%.print:%.gcode makefile
+       cp $< /media/${USER}/3D-PRINTER
+       sync
+       umount /media/${USER}/3D-PRINTER
+
+.PRECIOUS: %.gcode %.amf
+
+.PHONY: clean %.print
+
+clean:
+       rm -f *.gcode *.amf