--- /dev/null
+/* GNU AGPLv3 (or later at your option)
+ see bottom for more license info */
+
+/* measurements from misumi's 3030 aluminum extrusion data sheet
+ https://us.misumi-ec.com/pdf/fa/2012/p2_0545.pdf
+*/
+
+x = 30;
+y = 30;
+diagonal = sqrt(pow(30/2, 2) + pow(30/2, 2));
+opening_width = 8;
+opening_depth = 9;
+slot_major_width = 16.5;
+inner_block = 12;
+inner_hole = 6.8 / 2;
+
+major_block_corner_diameter = 4;
+major_block_corner_radius = major_block_corner_diameter / 2;
+major_block = 30 - major_block_corner_diameter;
+
+corner_block_inner = (30 - 16.5) / 2;
+wall = 2;
+
+$fn = 40;
+
+intersection(){
+ minkowski() {
+ square(x - major_block_corner_diameter, center=true);
+ circle(major_block_corner_radius); }
+
+ union(){
+ square(inner_block / 2);
+ rotate(45) translate([diagonal/2, 0]) square([diagonal, wall], center=true);
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); }
+
+ mirror([1, -1]) {
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); } }
+
+ rotate(90){
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); }
+
+ mirror([1, -1]) {
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); } } }
+
+ rotate(180){
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); }
+
+ mirror([1, -1]) {
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); } } }
+
+ rotate(270){
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); }
+
+ mirror([1, -1]) {
+ square(inner_block / 2);
+ rotate(45) {
+ translate([diagonal/2, 0]) {
+ square([diagonal, wall], center=true); } }
+ translate([x / 2-corner_block_inner, y / 2 - corner_block_inner]) {
+ square([corner_block_inner, corner_block_inner]); }
+ translate([opening_width / 2, y/2 - wall]) {
+ square([(x - opening_width) / 2, wall]); } } } } }
+
+/*
+ This file is part of 3d-printables.
+
+ 3d-printables is free software: you can redistribute it and/or modify
+ it under the terms of the GNU Affero General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ 3d-printables is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU Affero General Public License for more details.
+
+ You should have received a copy of the GNU Affero General Public License
+ along with challenge-bot. If not, see <http://www.gnu.org/licenses/>.
+*/