make tube to hold foot of bathroom shelves

diff --git a/foot-riser-data.scad b/foot-riser-data.scad
new file mode 100644 (file)
index 0000000..dbc60b2
--- /dev/null
+++ b/foot-riser-data.scad
@@ -0,0 +1,36 @@
+/* GNU AGPLv3 (or later at your option)
+   see bottom for more license info */
+
+/* riser foot for raising bathroom shelves */
+
+fudge = 1;
+riser_height = 200;
+foot_radius = 42 / 2 + fudge;
+wall_thickness = 3;
+
+module ring_2d(inner_radius, wall_thickness) {
+  outer_radius = inner_radius + wall_thickness;
+  difference() {
+    circle(outer_radius);
+    circle(inner_radius); } }
+
+module foot_riser() {
+     linear_extrude(height = 200) {
+          ring_2d(foot_radius, wall_thickness); } }
+
+/*
+  This file is part of 3d-printables.
+
+  3d-printables is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  3d-printables is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/

diff --git a/foot-riser.scad b/foot-riser.scad
new file mode 100644 (file)
index 0000000..d7fa523
--- /dev/null
+++ b/foot-riser.scad
@@ -0,0 +1,24 @@
+/* GNU AGPLv3 (or later at your option)
+   see bottom for more license info */
+
+/* riser foot for raisingbathroom shelves */
+include <foot-riser-data.scad>
+
+foot_riser();
+
+/*
+  This file is part of 3d-printables.
+
+  3d-printables is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  3d-printables is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/