* The IntakeArm consists of two rollers that are controlled by one motor, with
* a potentiometer on it.
*
- * The motor controls the rollers, making them roll forwards and backwards.
- * The Intake rollers are on the back of the robot. As the rollers run, they
- * intake the ball.
+ * The motor controls the rollers, making them roll forwards and backwards. The
+ * Intake rollers are on the back of the robot. As the rollers run, they intake
+ * the ball.
*
* @author superuser
*
*/
public class IntakeArm extends Subsystem {
+
private CANTalon intakeRoller;
private CANTalon intakeArm;
private AnalogPotentiometer intakePot;
+ private double[] potAngles = { 0, 45, 90 };
public IntakeArm() {
- intakeRoller = new CANTalon(Constants.IntakeArm.PORT);
- intakeArm = new CANTalon(Constants.IntakeArm.CHEVAL_DE_FRISE_HAND_PORT);
+ intakeRoller = new CANTalon(Constants.IntakeArm.ROLLER_PORT);
+ intakeArm = new CANTalon(Constants.IntakeArm.ARM_PORT);
+ intakePot = new AnalogPotentiometer(Constants.IntakeArm.POT_CHANNEL,
+ Constants.IntakeArm.FULL_RANGE, Constants.IntakeArm.OFFSET);
}
- /*
- * Intake only moves once at the beginning of the match. It lowers at the
- * beginning of the match and is held there by mechanical stops until the end
- * of the match.
- *
- * Must be used in a command that has a timer variable to stop it.
+ /***
+ * This method sets the voltage of the motor to intake the ball. The voltage
+ * values are constants in Constants class
*/
-
public void intakeBall() {
intakeRoller.set(Constants.IntakeArm.INTAKE_SPEED);
}
+ /***
+ * This method sets the voltage of the motor to output the ball. The voltage
+ * values are constants in Constants class
+ */
public void outputBall() {
intakeRoller.set(Constants.IntakeArm.OUTPUT_SPEED);
}
+ public void stopRollers() {
+ intakeRoller.set(0);
+ }
+
+ /***
+ * This method gets you the current voltage of the motor that controls the
+ * intake arm roller. The range of voltage is from [-1,1]. A negative voltage
+ * makes the motor run backwards.
+ *
+ * @return Returns the voltage of the motor that controls the roller. The
+ * range of the voltage goes from [-1,1]. A negative voltage indicates
+ * that the motor is running backwards.
+ */
+
+ public double getRollerVoltage() {
+ return intakeRoller.get();
+ }
+
/***
- * This method allows you to set the voltage of the motor. The range of
- * voltage is from [-1, 1]. A negative voltage makes the motor run backwards.
+ * This method sets the voltage of the arm motor. The range is from [-1,1]. A
+ * negative voltage makes the direction of the motor go backwards.
*
* @param voltage
- * The voltage of the motors that control the rollers. The range of
- * these motors go from [-1,1]. A negative voltage makes the motor
- * run
- * backwards.
+ * The voltage that you set the motor at. The range of the voltage of
+ * the arm motor is from [-1,1]. A negative voltage makes the
+ * direction of the motor go backwards.
*/
- public void setRollerVoltage(double voltage) {
+ public void setArmSpeed(double voltage) {
+ if (voltage > 1)
+ voltage = 1;
+ else if (voltage < -1)
+ voltage = -1;
+ intakeArm.set(voltage);
}
/***
* This method gets you the current voltage of the motor that controls the
- * intake arm. The range of voltage is from [-1,1].
- * A negative voltage makes the motor run backwards.
+ * intake arm. The range of voltage is from [-1,1]. A negative voltage makes
+ * the motor run backwards.
*
- * @return Returns the voltage of the motor that controls the roller. The
- * range of the voltage goes from [-1,1].
- * A negative voltage indicates that the motor is running backwards.
+ * @return Returns the voltage of the motor that controls the arm. The range
+ * of the voltage goes from [-1,1]. A negative voltage indicates that
+ * the motor is running backwards.
*/
- public double getRollerVoltage() {
- return 0;
+ public double getArmSpeed() {
+ return intakeArm.get();
}
/***
*/
public boolean areRollersRolling() {
+ if (Math.abs(getRollerVoltage()) < 0.02)
+ return false;
return true;
}
*
* @return angle of potentiometer
*/
- public double getIntakePot() {
- return intakePot.get();
+
+ public double getArmAngle() {
+ return intakePot.get() + Constants.IntakeArm.ZERO_ANGLE;
+ }
+
+ public void stop() {
+ setArmSpeed(0);
+ }
+
+ public double getAngleForLevel(double targetLevel) {
+ return potAngles[(int) (targetLevel - 1)];
}
@Override