2 // GNU AGPLv3 (or later at your option)
3 // project available at these locations:
4 // https://gitorious.org/ozzloy/challenge-bot
5 // https://github.com/waynegramlich/challenge-bot
9 include
<motor
-mount
-dimensions
.scad
>
12 collar_x_offset
= 10.8;
13 nubbin_x_offset
= 22.23;
14 // actual motor screw holes are 0.2 further than spec says
15 screw_x_offset
= 30.81 + 0.2;
16 screw_y_offset
= 17.44 / 2;
18 translate([collar_x_offset
, 0, 0]){
19 cylinder(r
= collar_radius
, h
= mount_total_z
+ 0.1);}
20 translate([nubbin_x_offset
, 0, 0]){
21 cylinder(r
= nubbin_radius
, h
= mount_total_z
+ 0.1);}
22 translate([screw_x_offset
, 0, 0]){
23 translate([0, screw_y_offset
, 0]){
24 cylinder(r
= screw_radius
, h
= mount_total_z
+ 0.1);}
25 translate([0, -screw_y_offset
, 0]){
26 cylinder(r
= screw_radius
, h
= mount_total_z
+ 0.1);}}}
28 module
bracket_holes(){
29 translate([6.2, 0, 0])
30 cylinder(r
= _6_radius
, h
= mount_total_z
+ 0.1);
31 translate([mount_total_x
- 6.2, 0, 0])
32 cylinder(r
= _6_radius
, h
= mount_total_z
+ 0.1);}
36 cube([mount_total_x
, mount_total_y
, mount_total_z
]);
37 translate([0, 6.2, -0.05]){
39 translate([1, mount_total_y
- motor_height
/ 2 - 3, -0.05]){