revert back to config from materia 101 repo

diff --git a/3d-printables/caster-standoff-data.scad b/3d-printables/caster-standoff-data.scad
index b4cf462bca181427d47f2a22f39f6b61b1a620ed..88c3cddf5b3e1284c19ee1daf9606703ec71a92d 100644 (file)
--- a/3d-printables/caster-standoff-data.scad
+++ b/3d-printables/caster-standoff-data.scad
@@ -10,7 +10,7 @@
 use <oshw.scad>
 
 // use 10 ish for development, 60 or so for printing
-$fn = 60;
+$fn = 100;
 
 /* measured with calipers */
 ball_diameter = 11 + 1; // extra bit added for printing imprecision

diff --git a/3d-printables/materia-101.ini b/3d-printables/materia-101.ini
index f4db62e859047353e4554fb294c05fcb8463026b..715a58d41074338de95e4b880481b2059a25e847 100644 (file)
--- a/3d-printables/materia-101.ini
+++ b/3d-printables/materia-101.ini
@@ -1,32 +1,32 @@
-# generated by Slic3r 1.2.10-dev on Wed Jul 29 16:18:39 2015
-avoid_crossing_perimeters = 1
-bed_shape = 0x0,140x0,140x100,0x100
+# generated by Slic3r 1.2.10-dev on Mon Aug  3 08:56:06 2015
+avoid_crossing_perimeters = 0
+bed_shape = 0x0,112x0,112x100,0x100
 bed_temperature = 0
 before_layer_gcode =
-bottom_solid_layers = 4
+bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_fan_speed = 50
-bridge_flow_ratio = 1.2
-bridge_speed = 60
+bridge_flow_ratio = 0.9
+bridge_speed = 40
 brim_width = 0
 complete_objects = 0
-cooling = 1
+cooling = 0
 default_acceleration = 0
 disable_fan_first_layers = 1
 dont_support_bridges = 1
 duplicate_distance = 6
-end_gcode = M104 S0\nM190 S0\nG1 Z100 F1000\nG1 X100 Y100 F3000\nM84
+end_gcode = M104 S0 T0\nM190 S0\nG1 Z200 F1000\nG1 X140 Y100 F16000\nM84
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 45
+external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
+extrusion_multiplier = 1,1,1
+extrusion_width = 0.35
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
@@ -36,48 +36,47 @@ fill_density = 20%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 0
-first_layer_extrusion_width = 0
+first_layer_extrusion_width = 0.4
 first_layer_height = 0.3
-first_layer_speed = 8
-first_layer_temperature = 220
-gap_fill_speed = 40
+first_layer_speed = 20
+first_layer_temperature = 197
+gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 1
 gcode_flavor = reprap
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 0.6
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 100%
-infill_speed = 17
+infill_overlap = 15%
+infill_speed = 40
 interface_shells = 0
 layer_gcode =
-layer_height = 0.15
+layer_height = 0.1
 max_fan_speed = 100
 max_print_speed = 80
 max_volumetric_speed = 0
 min_fan_speed = 100
-min_print_speed = 7
-min_skirt_length = 0
-notes = Profile for low quallity print with 20% infill and 0.15 mm z step\n\nMateria 101
+min_print_speed = 20
+min_skirt_length = 25
 nozzle_diameter = 0.35
 octoprint_apikey =
 octoprint_host =
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 70
-perimeters = 2
+perimeter_extrusion_width = 0.3
+perimeter_speed = 35
+perimeters = 4
 post_process =
 pressure_advance = 0
 raft_layers = 0
-resolution = 0.05
+resolution = 0.01
 retract_before_travel = 0
 retract_layer_change = 0
 retract_length = 2
@@ -85,43 +84,43 @@ retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 25
+retract_speed = 30
 seam_position = aligned
 skirt_distance = 4
 skirt_height = 1
-skirts = 4
-slowdown_below_layer_time = 5
-small_perimeter_speed = 40
+skirts = 2
+slowdown_below_layer_time = 30
+small_perimeter_speed = 35
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 45
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
-start_gcode = G28 ;Home all axis\nT0\nM106 S0 ;EXTRUDER FAN ON\nG1 Z10 F1000\nG1 X100 Y100 F3000\nM104 S[first_layer_temperature] \nM109 S[first_layer_temperature]\nG92 E0
+start_gcode = M204 S1800\nG28 ;Home all axis\nT0\nM106 S127 ; EXTRUDER FAN ON\nG1 Z10 F1000\nG92 E0\nM117 Printing...
 support_material = 0
 support_material_angle = 45
 support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
+support_material_enforce_layers = 3
 support_material_extruder = 1
-support_material_extrusion_width = 70%
+support_material_extrusion_width = 0.25
 support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_layers = 3
+support_material_interface_spacing = 1
+support_material_interface_speed = 40
 support_material_pattern = rectilinear-grid
-support_material_spacing = 3
-support_material_speed = 50
+support_material_spacing = 5
+support_material_speed = 40
 support_material_threshold = 45
-temperature = 200
+temperature = 195
 thin_walls = 1
 threads = 2
 toolchange_gcode =
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 10
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 40
 top_solid_layers = 4
-travel_speed = 120
+travel_speed = 100
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0