describe how to prepare battery leads

diff --git a/guide/2-batteries/0-prepare-leads/0-prepare-leads.ogv b/guide/2-batteries/0-prepare-leads/0-prepare-leads.ogv
new file mode 100644 (file)
index 0000000..2fe1373
Binary files /dev/null and b/guide/2-batteries/0-prepare-leads/0-prepare-leads.ogv differ

diff --git a/guide/challenge-bot.scm b/guide/challenge-bot.scm
index 8e2e5eb4693aaa2415676291fdb16c0490427765..9542c53e13b9ef36c0d589e19673f719c54a8d4b 100644 (file)
--- a/guide/challenge-bot.scm
+++ b/guide/challenge-bot.scm
@@ -325,7 +325,22 @@
   (section
    :title [battery packs]
    (subsection
-    :title [leads])
+    :title [leads]
+    (p ["leads" are the wires coming out of the battery pack.
+        prepare the leads of the batteries by stripping them and placing
+        heat shrink on them.
+        your battery packs are not attached to your deck yet,
+        but that will be the next step.])
+    (figure :legend "batteries / prepare leads / video"
+            (video
+             :file "2-batteries/0-prepare-leads/0-prepare-leads.ogv"))
+    (enumerate
+     (item [strip the leads a tiny bit at a time.
+                  keep stripping until a total of an inch is stripped.])
+     (item [strip both leads of both batteries.])
+     (item [then place heat shrink on every lead.
+                 make sure the heat shrink is either clear or matches
+                 the color of the lead.])))
    (subsection
     :title [deck attachment]))
   (section