fill subsubsection on drilling the first hole

diff --git a/curriculum/challenge-bot.scm b/curriculum/challenge-bot.scm
index 15ea4e00f96688f15b856dac3faf8d649757ac1b..2ebd03481528a8901033e6cedd87a1cec6968d41 100644 (file)
--- a/curriculum/challenge-bot.scm
+++ b/curriculum/challenge-bot.scm
@@ -111,7 +111,28 @@
             [why not place the arduino up along the left side of the
                  robot?]))]))
     (subsubsection
-     :title [drilling]))
+     :title [drilling]
+     (p [place the drill bit in position.
+               brint the drill up to full speed, and keep it full speed.
+               push down until the drill bit has passed through the
+               deck.
+               keep the drill at full speed.
+               stop before the drill smashes into the arduino.
+               keep the drill at full speed by holding the trigger.
+               bring the drill straight back up.
+               hold the trigger down to keep the drill at full speed.
+               once the drill is back out of the hole, let go of the
+               trigger.])
+     (p [check
+         ,(itemize
+           (item
+            [should the drill be at full speed while the drill bit is
+                    going down into the wood and coming back up?])
+           (item
+            [what would happen if the drill bit were not at full
+                  speed?])
+           (item
+            [how do you keep the drill at full speed?]))])))
    (subsection
     :title [first screw]
     (subsubsection