projects
/
challenge-bot
/ commitdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
| commitdiff |
tree
raw
|
patch
|
inline
| side by side (parent:
1c7c3a5
)
thin out reinforcements to make printing faster
author
daniel watson
<ozzloy@gmail.com>
Mon, 28 Oct 2013 20:42:24 +0000
(13:42 -0700)
committer
daniel watson
<ozzloy@gmail.com>
Mon, 28 Oct 2013 20:42:24 +0000
(13:42 -0700)
caster-standoff.scad
patch
|
blob
|
blame
|
history
diff --git
a/caster-standoff.scad
b/caster-standoff.scad
index 973aa00b32980c2b88811c48df19b54333551d7c..ce84d2512cfd1f2f85eb0064491d3b7666b5a2a7 100644
(file)
--- a/
caster-standoff.scad
+++ b/
caster-standoff.scad
@@
-11,15
+11,15
@@
nut_short_side = 4.7; // from calipers
nut_height = 1.6; // from calipers
// eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
nut_height = 1.6; // from calipers
// eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
-caster_flange_height = 2.9464
* 2
;
+caster_flange_height = 2.9464;
caster_flange_width = 20.32; // 0.800 inches
caster_flange_screw_radius = 2.286 / 2; // 0.090 inches
caster_flange_screw_length = 8; // eyeballed
caster_flange_width = 20.32; // 0.800 inches
caster_flange_screw_radius = 2.286 / 2; // 0.090 inches
caster_flange_screw_length = 8; // eyeballed
-deck_grid_width =
17.4; // guessing
-deck_flange_height = 2.9464
* 2
;
+deck_grid_width =
25.4; // measured center to center on grid on pegboard
+deck_flange_height = 2.9464;
deck_flange_screw_radius = 3.556 / 2; // For #6 machine screws
deck_flange_screw_radius = 3.556 / 2; // For #6 machine screws
-deck_flange_radius = deck_grid_width * 1.
5
;
+deck_flange_radius = deck_grid_width * 1.
22
;
module deck_flange(){
difference(){
module deck_flange(){
difference(){
@@
-37,10
+37,10
@@
module deck_flange(){
module deck_flange_reinforcement(){
translate([-deck_flange_radius,
module deck_flange_reinforcement(){
translate([-deck_flange_radius,
- -.5 * deck_flange_height,
+ -.5 * deck_flange_height
/ 2
,
deck_flange_height]){
difference (){
deck_flange_height]){
difference (){
- cube([deck_flange_radius, deck_flange_height, deck_flange_radius]);
+ cube([deck_flange_radius, deck_flange_height
/ 2
, deck_flange_radius]);
translate([-.1, -.05 * deck_flange_height, 0]){
rotate([0, -45, 0]){
cube([deck_flange_radius * 1.5, // 1.5 is bigger than sqrt(2)
translate([-.1, -.05 * deck_flange_height, 0]){
rotate([0, -45, 0]){
cube([deck_flange_radius * 1.5, // 1.5 is bigger than sqrt(2)