dobervich: make caster standoff smaller for faster printing

diff --git a/caster-standoff.scad b/caster-standoff.scad
index c855e87306a14b411ad4be7e458cc2df38919486..973aa00b32980c2b88811c48df19b54333551d7c 100644 (file)
--- a/caster-standoff.scad
+++ b/caster-standoff.scad
@@ -16,11 +16,9 @@ caster_flange_width = 20.32;  // 0.800 inches
 caster_flange_screw_radius = 2.286 / 2;  // 0.090 inches
 caster_flange_screw_length = 8; // eyeballed
 
 caster_flange_screw_radius = 2.286 / 2;  // 0.090 inches
 caster_flange_screw_length = 8; // eyeballed
 

-deck_grid_width = 25.4; // guessing
-/* setting deck flange values same as caster flange pending
- * physical testing. */
+deck_grid_width = 17.4; // guessing

 deck_flange_height = 2.9464 * 2;
 deck_flange_height = 2.9464 * 2;

-deck_flange_screw_radius = 2.286 / 2;  // 0.090 inches
+deck_flange_screw_radius = 3.556 / 2;  // For #6 machine screws

 deck_flange_radius = deck_grid_width * 1.5;
 
 module deck_flange(){
 deck_flange_radius = deck_grid_width * 1.5;
 
 module deck_flange(){