use honeycomb instead of 3d

* honeycomb is better than 3dhoneycomb for most of the parts.
* the 3d version seems to be better for large volumes.
* with the small volumes, 3dhoneycomb basically turns into squares

diff --git a/3d-printables/makerfarm-i3-v-8in.ini b/3d-printables/makerfarm-i3-v-8in.ini
index 68c70414b3b8fc65531aab2a83ea78ac186ff91a..dde7f4773318dc7fa69696d4c4cce02f193e5424 100644 (file)
--- a/3d-printables/makerfarm-i3-v-8in.ini
+++ b/3d-printables/makerfarm-i3-v-8in.ini
@@ -1,3 +1,4 @@
+# generated by hand, probably with slic3r 1.1 or something

 
 # [filament:makerfarm-i3-v-8in]
 bed_temperature = 70
 
 # [filament:makerfarm-i3-v-8in]
 bed_temperature = 70


@@ -41,7 +42,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = 3dhoneycomb
+fill_pattern = honeycomb

 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
 first_layer_height = 0.35
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
 first_layer_height = 0.35


@@ -168,7 +169,7 @@ fan_below_layer_time = 60
 filament_diameter = 1.75
 fill_angle = 45
 fill_density = 20%
 filament_diameter = 1.75
 fill_angle = 45
 fill_density = 20%

-fill_pattern = 3dhoneycomb
+fill_pattern = honeycomb

 first_layer_acceleration = 0
 first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_acceleration = 0
 first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%