1 /* GNU AGPLv3 (or later at your option)
2 see bottom for more license info */
4 /* measurements from misumi's 3030 aluminum extrusion data sheet
5 https://us.misumi-ec.com/pdf/fa/2012/p2_0545.pdf
10 diagonal
= sqrt(pow(30/2, 2) + pow(30/2, 2));
14 major_block_corner_diameter
= 4;
15 major_block_corner_radius
= major_block_corner_diameter
/ 2;
17 corner_block_inner
= (30 - 16.5) / 2;
23 square(inner_block
/ 2);
25 square([diagonal
- major_block_corner_radius
, wall
/ 2]); }
26 translate([x
/ 2 - corner_block_inner
, y
/ 2 - corner_block_inner
]) {
27 square(corner_block_inner
- wall
); }
28 translate([(opening_width
+ major_block_corner_diameter
) / 2,
30 square([(x
- opening_width
- 2 * major_block_corner_diameter
) / 2,
32 translate([0, wall
/2]){
34 translate([(x
- major_block_corner_diameter
) / 2,
35 (y
- major_block_corner_diameter
) / 2]) {
36 circle(major_block_corner_radius
); } }
39 for(arm
= [0:arms
- 1]) {
40 rotate(arm
* 360 / arms
) {
42 mirror(){ arm_half(); } } }
45 This file is part of 3d-printables.
47 3d-printables is free software: you can redistribute it and/or modify
48 it under the terms of the GNU Affero General Public License as published by
49 the Free Software Foundation, either version 3 of the License, or
50 (at your option) any later version.
52 3d-printables is distributed in the hope that it will be useful,
53 but WITHOUT ANY WARRANTY; without even the implied warranty of
54 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
55 GNU Affero General Public License for more details.
57 You should have received a copy of the GNU Affero General Public License
58 along with challenge-bot. If not, see <http://www.gnu.org/licenses/>.