projects / challenge-bot / search
? search:
summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next
add untethered sketch and schematic
2013-11-14 daniel watsonadd untethered sketch and schematic
 commit | commitdiff | tree
2013-11-14 daniel watsonharmonize challenge-bot with sketches
 commit | commitdiff | tree
2013-11-14 daniel watsonclean printing files in 3d-printables/ dir
 commit | commitdiff | tree
2013-11-14 daniel watsonswitch to linear extrude for arm of sonar holder
 commit | commitdiff | tree
2013-11-12 daniel watsongrab deck holder with sonar sensor arm really well
 commit | commitdiff | tree
2013-11-12 daniel watsoncompensate for variance between centers of sensors
 commit | commitdiff | tree
2013-11-09 daniel watsoninterlock the caster standoff top and bottom
 commit | commitdiff | tree
2013-11-09 daniel watsonconfirm sonar holder for 3/8 inch deck
 commit | commitdiff | tree
2013-11-09 daniel watsonfit sonar sensor holder for 1/4 inch deck
 commit | commitdiff | tree
2013-11-08 daniel watsonadd both motors test
 commit | commitdiff | tree
2013-11-08 daniel watsonright motor initial setup
 commit | commitdiff | tree
2013-11-08 daniel watsonadd both sonars
 commit | commitdiff | tree
2013-11-08 daniel watsonmake motor mount
 commit | commitdiff | tree
2013-11-08 daniel watsonadd right sonar sketch and fritzing diagram
 commit | commitdiff | tree
2013-11-07 daniel watsonput sketches and 3d printables into sub-dirs
 commit | commitdiff | tree
2013-11-07 daniel watsonsimplify wiring, keep right and left separated
 commit | commitdiff | tree
2013-11-07 daniel watsonclarify pin variables, remove set low
 commit | commitdiff | tree
2013-11-06 daniel watsonnewline at end of file
 commit | commitdiff | tree
2013-11-06 daniel watsonleave caster-standoff ready for printing
 commit | commitdiff | tree
2013-11-06 daniel watsonhold sonar sensor and robot deck press fit
 commit | commitdiff | tree
2013-11-06 daniel watsonmake sonar holder press fit onto 1/4 inch board
 commit | commitdiff | tree
2013-11-04 daniel watsonuse global fragment number for caster standoff
 commit | commitdiff | tree
2013-11-04 daniel watsonmake deck flange smaller to print caster faster
 commit | commitdiff | tree
2013-11-03 daniel watsonupdate sonar sensor holder after physical test
 commit | commitdiff | tree
2013-11-03 daniel watsonremove unused LED to make code smaller
 commit | commitdiff | tree
2013-11-03 daniel watsonfixed fritzing finding fraudulent files
 commit | commitdiff | tree
2013-11-03 daniel watsonuse motor to test wiring
 commit | commitdiff | tree
2013-11-03 daniel watsonset '$fn' globally based on develop or print for wheel
 commit | commitdiff | tree
2013-11-03 daniel watsonmake sonar holder 3d printable without overhang
 commit | commitdiff | tree
2013-11-03 daniel watsonstandardize phase3 more
 commit | commitdiff | tree
2013-11-03 daniel watsondelete intermediate 3d print files with make clean
 commit | commitdiff | tree
2013-11-01 daniel watsonupdate formatting
 commit | commitdiff | tree
2013-11-01 daniel watsonhold sonar sensor oriented for table top challenge
 commit | commitdiff | tree
2013-10-31 daniel watsonuse mini breadboard in schematic
 commit | commitdiff | tree
2013-10-30 daniel watsonsmooth out the cylinders
 commit | commitdiff | tree
2013-10-30 daniel watsonbuild top and bottom separately
 commit | commitdiff | tree
2013-10-29 daniel watsonmake caster flange top half
 commit | commitdiff | tree
2013-10-28 daniel watsonclearly comment the shape and placement
 commit | commitdiff | tree
2013-10-28 daniel watsonbreak caster-standoff into 2 pieces for printing
 commit | commitdiff | tree
2013-10-28 daniel watsonthin out reinforcements to make printing faster
 commit | commitdiff | tree
2013-10-26 daniel watsonnotes for phase0 aka traffic lights
 commit | commitdiff | tree
2013-10-25 daniel watsonnewline
 commit | commitdiff | tree
2013-10-25 daniel watsonspell out order of subprojects in top level readme
 commit | commitdiff | tree
2013-10-25 daniel watsonadd pushbutton example
 commit | commitdiff | tree
2013-10-25 daniel watsonadd serial example
 commit | commitdiff | tree
2013-10-24 daniel watsonadd notes for some wheel measurements
 commit | commitdiff | tree
2013-10-23 daniel watsonmove motor shaft z-size into its module
 commit | commitdiff | tree
2013-10-23 daniel watsondobervich: make caster standoff smaller for faster...
commit | commitdiff | tree
2013-10-23 daniel watsondobervich: make wheel thinner to print faster
 commit | commitdiff | tree
2013-10-23 daniel watsonclean up spacing on motor-mount drill jig
 commit | commitdiff | tree
2013-10-22 daniel watsoncomment what the drill jig is
 commit | commitdiff | tree
2013-10-22 daniel watsonrename motor mount to avoid clash on mounting bracket...
commit | commitdiff | tree
2013-10-22 daniel watsonsymetric mounting bracket, needs actual measurements
 commit | commitdiff | tree
2013-10-22 daniel watsonadd cleaned up dobervich's mounting bracket drill jig
 commit | commitdiff | tree
2013-10-22 daniel watsonadd dobervich's bill of materials
 commit | commitdiff | tree
2013-10-04 daniel watsonadd deck flange with reinforcements
 commit | commitdiff | tree
2013-10-04 daniel watsonremove ziptie and move flange to top
 commit | commitdiff | tree
2013-10-04 daniel watsonuse global variables for everything
 commit | commitdiff | tree
2013-10-01 daniel watsonadd spokes to wheel
 commit | commitdiff | tree
2013-09-22 daniel watsonadd ignores for pcb kicad files
 commit | commitdiff | tree
2013-09-15 daniel watsonmake sure files survived transition from wayne's rev_c dir
 commit | commitdiff | tree
2013-09-15 daniel watsonadd target for seeedstudio zip
 commit | commitdiff | tree
2013-09-15 daniel watsonget rid of some vias
 commit | commitdiff | tree
2013-09-15 daniel watsondraw sonar wires on footprint
 commit | commitdiff | tree
2013-09-15 daniel watsonmove sonar connectors to nice spot in footprint
 commit | commitdiff | tree
2013-09-15 daniel watsongive sonar sensors SIL-4 connector footprint
 commit | commitdiff | tree
2013-09-15 daniel watsonpass ERC on sonar connectors, after save
 commit | commitdiff | tree
2013-09-15 daniel watsonreplace old sonar connector with newly created one
 commit | commitdiff | tree
2013-09-15 daniel watsoncreate connector for sonar, remove old connector
 commit | commitdiff | tree
2013-09-15 daniel watsonadd 2 4-pin connectors for sonar
 commit | commitdiff | tree
2013-09-15 daniel watsoninspect gerber, fix thermal, motorcontroller and power...
commit | commitdiff | tree
2013-09-15 daniel watsonfinished initial layout
 commit | commitdiff | tree
2013-09-15 Wayne C. GramlichAdded MakerBus reset circuit.
 commit | commitdiff | tree
2013-09-15 Wayne C. GramlichMinor modifications to revision C.
 commit | commitdiff | tree
2013-09-15 Wayne C. GramlichAdded rev. C
 commit | commitdiff | tree
2013-09-14 daniel watsonmeasure nuts instead of guess from diagram
 commit | commitdiff | tree
2013-09-08 daniel watsonadd ziptie holes, hull mount fixture
 commit | commitdiff | tree
2013-09-08 daniel watsoncomment where the measurements come from
 commit | commitdiff | tree
2013-09-08 daniel watsoncreate caster standoff
 commit | commitdiff | tree
2013-09-08 daniel watsonmake motor shaft hole bigger to fit actual shaft
 commit | commitdiff | tree
2013-09-08 daniel watsonclean up code to use abstraction
 commit | commitdiff | tree
2013-09-08 daniel watsonadd editorconfig
 commit | commitdiff | tree
2013-09-08 daniel watson3d printable wheel
 commit | commitdiff | tree
2013-09-08 daniel watsonadd bill of materials
 commit | commitdiff | tree
2013-09-08 daniel watsonuse default $fn
 commit | commitdiff | tree
2013-09-08 daniel watsonuse more descriptive names for deck dimensions
 commit | commitdiff | tree
2013-09-02 daniel watsonadd wheel mount reinforcements
 commit | commitdiff | tree
2013-09-02 daniel watsoncenter deck for printing
 commit | commitdiff | tree
2013-09-02 daniel watsonmake variables for pieces of deck_dimensions
 commit | commitdiff | tree
2013-09-02 daniel watsonfix nubin to nubbin
 commit | commitdiff | tree
2013-09-02 daniel watsonignore gcode and x3g files
 commit | commitdiff | tree
2013-09-01 daniel watsonignore generated stl files
 commit | commitdiff | tree
2013-09-01 daniel watsonadd scale factor and use modules for more pieces
 commit | commitdiff | tree
2013-09-01 daniel watsonswitch to camelCase to match arduino style
 commit | commitdiff | tree
2013-09-01 daniel watsonremove public domain notices
 commit | commitdiff | tree
2013-08-31 daniel watsonignore media files and built files
 commit | commitdiff | tree
2013-08-17 daniel watsondraw robot in 3d
 commit | commitdiff | tree
2013-08-11 daniel watsonstarting schematics
 commit | commitdiff | tree
2013-07-30 daniel watsonadd code for phase0 through phase3
 commit | commitdiff | tree
2013-06-30 daniel watsonrename sketch to challenge-bot
 commit | commitdiff | tree
next
build your first robot